Battery Powered Hydraulic Crimping Tool, ED-400
AUSTON TOOL
Manufacturer's warranty service in Australia
Item No: ED-400
Battery Powered Cable Crimping Tool ED-400 For 16 - 400mm square
FEATURES:
1. The unit is equipped with a double piston pump which is characterized by a rapid approach of the dies. Forwards the connector and a slow crimping motion.
2. The hydraulic unit incorporates an automatic retraction which returns the piston into its starting position. When the maximum operation pressure is reached.
3. A manual retraction allows the user to return the piston into the starting position in case of an incorrect crimp. The unit is equipped with a special brake when stops the forward motion of the piston& die when. The button is pressed.
4. The crimping head can be smoothly turned by 360 degree around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
5. Li-ion batteries do neither have a memory effect nor self-discharge even after long periods of non operation. The tool is always ready to operate. In addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to NiMH batteries.
6. If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
SPECIFICATIONS:
|
Crimping force:
|
120KN
|
|
Stroke:
|
42mm
|
|
Max crimping:
|
Cu 400mm??/Al300mm??
|
|
Cycle time:
|
6-8s (Cu150mm2)
|
|
Cycles/charger:
|
Approx.120cycles
(Cu150mm2)
|
|
Voltage/capacity:
|
18V/3.0Ah
|
|
Charging time:
|
Approx.60 mins
|
|
Package:
|
Plastic Box
|
ACCESSORIES:
|
CRIMPING DIES: 16,25,35,50,70,95,120,150,185,240,300,400mm??
|
|
Battery:
|
2pcs
|
|
Charger:
|
1pc
|
|
Sealing ring of cylinder:
|
1set
|
|
Sealing ring of safety
Valve:
|
1set
|
|
